Ultra Chem ST Sterile Type 5 & 6 Coveralls

Size
Please select from the options above.
Quantity:
-
+

Ultra Chem ST uses a high quality polyethylene film laminated to spunbonded polypropylene (65gsm / msq) to produce an excellent effective range of type 5& 6 disposable coveralls. combine ecellent liquid and dust barrier properties, high strength: softness and moisture vapour transmission (mvtr) for enhanced user comfort.
       
Applications
Protection against hazardous dusts and light splashes
Paint Spray (non-linting surface)
Asbestos Removal and handling
Pharmaceutical Manufacture
Chemical Spray
Food Industry
Clean room applications (may require additional cleaning)
General cleaning and maintenance applications
Protection against resins & oils
Model Description
Elasticated Face & wrist
Three piece hood for improved comfort
Attached boot covers for hygiene rules
Coveragenset sleeve
Two way zip
Two piece gusset to crotch Movement
Electrostatic discharge if properly grounded according to EN 1149-1*
Protection against particulate radioactive contamination according to EN1073-2
Category 3 complex design
Type 6: Limited protection against liquid mist*   EN 13034
Type 5: Protection against airborne solid particulate chemicals*EN ISO 13982-1
Sterilized for cleanroom environments
We have chosen and developed the ultra-chem NS protective coverall specifically for sterilization for cleanroom applications as the coverall already has many of the key components for a cleanroom environment before it is sterilized, however once sterilized the cover is the perfect choice for all cleanroom environments. Function of Cleanroom Clothing:
 
Sterile & Cleanroom Clothing
The choice of protective clothing in a clean room environment is crucial in terms of contamination control management in a clean room environment, specifically because it can prevent contamination but also generate it in case it is not adequate:
The importance of a Cleanroom
For a whole range of industries, such as pharma-ceuticals, food processing, electronics, surface lating and coating, it’s not just the people so much as the products or processes that must be kept clean and uncontaminated.  Whilst air purification, ventilation and access systems help to maintain internationally recognised standards for article control, simply selecting the right type of protective clothing can minimise the risk of contamination through personnel that represent a critical source of contamination.In this brochure, we will provide garment and wipe solutions for an effective contamination.
 
understanding the importance of a cleanroom invironment
For a whole range of industries, such as pharma-ceuticals, food processing, electronics, surface lating and coating, it’s not just the people so much as the products or processes that must be kept clean and uncontaminated. Whilst air purification, ventilation and access systems help to maintain internationally recognised standards for article control, simply selecting the right type of protective clothing can minimise the risk of contamination through personnel that represent
a critical source of contamination.In this brochure, we will provide garment and wipe solutions for an effective contamination
 
Ultra-Chem ST is sterilized using Ethylene Oxide
 
What is Ethylene oxide C2H4O?
Ethylene oxide C2H4O is a colourless gas or colourless liquid below 10 deg C. The gas is slightly heavier than air it is a simple chemical compound that is commonly used for gaseous sterilization of disposable healthcare products. Ethylene oxide is an alkylating agent that disrupts the DNA of microorganisms, which prevents them from reproducing. Ethylene oxide sterilization assures that a safe and sterile product will be delivered to the consumer each and every time.
 
Sterilization process
The ethylene oxide C2H4O sterilization is a chemical process consisting of four primary variables: gas concentration, humidity, temperature and time. The product is loaded into the sterilization chamber, where it is exposed to all three phases of the sterilization process (pre-conditioning, sterilization and aeration.
 
Pre-conditioning: Used to preheat and humidify product loads to predefined conditions. This will assure a repeatable sterilization process regardless of pre-processing load storage conditions
Sterilization: Performed using process phases specifically designed to provide the required level of ethylene oxide exposure to assure sterility for a device or family of devices
Aeration: Used to accelerate out gassing of exposed product loads and to contain and eliminate residual ethylene oxide emissions.
Packaging
It is vital that the correct packaging is applied to the product to ensure the coverall remains in a sterile state until use, the package is critical to ensuring product sterility. Once the sterilization process has taken place the coverall is heat sealed into a vacuumed packed, clear sleeve with clearly marked storage conditions recommended shelf life, date of manufacture, and manufacture guidance for usage.
Protection of product and cleanroom environment against contamination by people
Protection of people against solid or liquid hazardous substances and biological hazards
Shall offer good electrostatic charge dissipation
Shall not generate contamination
Shall allow heat exchange for wearer. Cleanroom clothing as potential source of contamination:
the material surface particle shedding
residues remaining from the cleaning or decontamination treatment
 
particles that penetrate the cleanroom clothing through the fabric, openings or, seams fibre release if low abrasion resistance of the clothing fabric.

No detailed specifications are available for this product.

There are no downloads for this product.

There are no reviews for this product yet. Be the first to add one!